APACHE RTX 300

Description

This guard wraps around the TVS Apache RTX 300's front brake master cylinder, protecting it from impact damage in a minor fall or tip-over.

Made from stainless steel, it clamps onto the existing reservoir mount and adds minimal bulk to the handlebar area.

Description

This guard fits around the front brake fluid reservoir on the TVS Apache RTX 300, adding a layer of protection against knocks and scrapes.

It's made from mild steel and fastens on using the reservoir's existing clamp hardware, with no permanent modification needed.

Description

This radiator guard protects the TVS Apache RTX 300's radiator core from stone chips and debris kicked up from the road ahead.

Made from mild steel mesh, it bolts onto the factory radiator mounting points and is finished to resist everyday wear.

Description

This footrest set replaces the stock pegs on the TVS Apache RTX 300 with a wider platform, giving the rider more support and better grip while riding.

Machined from aluminium with a serrated top surface for grip, it bolts directly onto the existing footpeg mounts.

Description

This GPS mount gives the TVS Apache RTX 300 a fixed point near the cockpit for a phone holder or navigation unit, keeping it within easy view while riding.

It clamps onto the handlebar or yoke area using the bike's existing hardware and accepts most standard mount adapters.

Description

This radiator guard sits in front of the TVS Apache RTX 300's radiator core, screening out stones and road debris that could otherwise puncture the fins.

Cut from stainless steel mesh, it resists corrosion and mounts using the bike's factory radiator fasteners without blocking airflow.

Description

This side stand extender widens the footprint of the TVS Apache RTX 300's side stand, reducing the chance of the bike sinking into soft ground or tipping on a slight incline.

It clips or bolts onto the stock side stand foot and is made from durable metal designed to handle the bike's parked weight.

Description

This engine guard covers the underside of the TVS Apache RTX 300's engine casing, protecting the sump from stone strikes and scraping on speed bumps or rough roads.

It's made from mild steel plate, formed to follow the engine's underside profile, and bolts on using the bike's existing mounting points.

Description

This handlebar riser raises the bar height on the TVS Apache RTX 300 slightly, bringing the grips closer and higher for a more upright, comfortable riding position.

Machined from aluminium, it clamps between the top yoke and the stock handlebar mounts and installs with basic hand tools.

Description

A protective grill for the TVS Apache RTX 300's headlight, cut in a spider-web pattern that shields the lens from stones and road debris.

It bolts on over the headlight cowl using the stock fasteners and is finished to blend with the bike's front fascia.

Description

This headlight grill fits over the TVS Apache RTX 300's headlight unit to guard the lens against stone chips and debris thrown up from the road.

It uses a honeycomb mesh pattern that keeps light output largely unobstructed and mounts with the bike's existing headlight cowl fasteners.

Description

The saddle stay is a support frame that mounts around the TVS Apache RTX 300's rear subframe to carry saddlebags or panniers without them rubbing against the exhaust or rear wheel.

Constructed from mild steel tubing, it bolts on using existing frame points and is designed to work alongside the bike's stock rear carrier setup.

Description

A rear luggage carrier for the TVS Apache RTX 300, giving riders a stable mounting surface for a top box or bungee-strapped luggage on tour.

Made from welded steel tubing with a black finish, it fits directly onto the bike's rear subframe mounting points without modification.

Description

The Stallion crash guard wraps around the lower frame of the TVS Apache RTX 300, giving the engine cases and radiator a layer of protection against ground contact in a fall.

Finished in black to match the bike's stock look, it's made of welded mild steel tubing and installs through the factory frame mounting points.

Description

The Stallion crash guard is a standard-duty frame guard for the TVS Apache RTX 300 that covers the lower engine and radiator area, reducing the chance of expensive damage in a minor fall.

Made from welded mild steel tubing in a white powder-coated finish, it fits onto the bike's stock mounting points and requires no permanent modification to install.

Description

This white-finished Stallion Pro crash guard wraps the TVS Apache RTX 300's lower frame rails and engine area, keeping tubing between the ground and the motor if the bike goes down at low speed.

It uses mild steel tubing welded into a single guard and bolts directly to the existing frame mounts, so fitment is straightforward and engine access for servicing is unaffected.

Description

The Stallion Pro is a heavier-duty crash guard built for the TVS Apache RTX 300, wrapping the lower frame and engine cases in tubular steel so a low-speed tip-over or parking-lot knock doesn't reach the motor. The black finish is powder coated for a clean factory-matched look.

Constructed from mild steel tubing and MIG-welded at the joints, it bolts on through the bike's existing frame mounting points without any drilling or cutting. It leaves full access to the engine for routine servicing once installed.

The underside of your engine takes the first hit from rocks, ruts, and speed breakers taken a little too fast - and on the RTX 300, that's exposed casing with nothing standing between it and the road. The Vambrace Bashplate closes that gap, shielding the engine and lower frame so a rough trail doesn't turn into a repair bill.

It's built from mild steel, thick enough to absorb impact from underbody strikes without deforming, and shaped to bolt on without any cutting or modification to the stock frame. A matte black coating finishes the plate, resisting corrosion while giving the underbody a purposeful, rugged look that suits both on-road and off-road use.

With the Vambrace fitted, you can take on gravel trails and broken city roads with one less thing to worry about scraping against.

• Full-coverage bashplate for engine and lower frame protection
• Heavy-duty mild steel construction for impact resistance
• Direct bolt-on fit - no cutting or modification required
• Matte black corrosion-resistant coating
• Built for both on-road and off-road riding

A tail rack with nowhere secure to strap your luggage is only half useful. The Genesis Carrier Plate in silver bolts onto your Apache RTX 300's OEM carrier and gives you an actual mounting surface for a top box, so gear stays locked in place instead of sliding around on bungee cords.

The plate is built from a combination of aluminium and mild steel, keeping it light on the tail section while still holding its shape under load. It fits straight onto the factory carrier with no drilling or cutting, and the polished silver finish is designed to blend with the bike's factory styling rather than standing out as an aftermarket bolt-on.

Once mounted, it turns your stock carrier into a ready base for a top case, giving you a straightforward way to add carrying capacity for commuting or weekend rides.

• Direct-fit carrier plate for the TVS Apache RTX 300 OEM carrier
• Aluminium and mild steel build for a light yet sturdy platform
• Bolt-on installation - no drilling or cutting required
• Silver finish that complements the bike's factory look
• Ready mounting base for a top box or rear luggage

Bungee cords and strap-on tail bags only get you so far before they start chewing through your seat trim or shifting loose on a rough stretch of road. The Genesis Carrier Plate gives your Apache RTX 300 a proper mounting point for a top box or duffel, built straight onto the OEM carrier so nothing wobbles once you're loaded up.

It's built from a mix of mild steel and lightweight aluminium, striking a balance between load-bearing strength and keeping the extra mass off your tail section. The plate bolts directly onto the stock carrier with no drilling or cutting, and a black-coated finish resists corrosion so it holds its look through repeated exposure to rain and road grime.

Once fitted, it turns the rear of your Apache into a dependable cargo platform for weekend rides or longer tours, ready to take a top case the moment you need extra carrying capacity.

• Direct-fit carrier plate for the TVS Apache RTX 300 OEM carrier
• Mild steel and aluminium construction for strength without excess weight
• Bolt-on installation - no drilling or cutting required
• Corrosion-resistant black-coated finish
• Ready platform for mounting a top box or rear luggage

A low-speed tip-over or a spill on loose gravel shouldn't turn into a cracked fairing or a bent radiator guard. Stock bodywork on the Apache RTX 300 offers little in the way of first-line impact protection.

The Raptor Crash Guard Set covers both the upper and lower sections in one kit, built from mild steel and finished in a bold red powder coat that's tough enough to shrug off scrapes without flaking. The two-piece layout spreads impact force away from the engine casing, radiator, and side panels, and it bolts on using the bike's existing mounting points.

With the full set fitted, the Apache RTX 300 is far better equipped to handle the odd drop or off-road tumble without turning into a repair bill.

What it does:

• Upper and lower guard set - full front and engine coverage
• Mild steel construction, red powder-coated finish
• Absorbs impact from tip-overs and low-speed drops
• Bolt-on fit using factory mounting points
• Built specifically for the TVS Apache RTX 300

Kicking the side stand out on soft ground or an angled shoulder is a quick way to watch your Apache RTX 300 tip over. A stock stand tip that's barely bigger than a coin doesn't help once you're off tarmac.

The Genesis Side Stand Base bolts onto the factory stand and widens the footprint significantly, spreading the bike's weight over more surface area. It's built from mild steel for the load-bearing base with an aluminium and black/silver two-tone finish that matches the rest of the Genesis lineup, and it's a straightforward bolt-on with no permanent changes to the stand itself.

The result is a bike that stays upright and stable whether it's parked on gravel, sand, or a sloped forecourt.

What it does:

• Widens the side stand's contact area to prevent sinking on soft or uneven ground
• Mild steel and aluminium construction, Black/Silver two-tone finish
• Simple bolt-on fit to the factory side stand - no cutting or drilling
• Adds stability for off-road and gravel parking

A worn or loose oil cap is easy to overlook — until it starts leaking or feels like it could rattle off mid-ride. The Tricorn Front Oil Cap swaps in a precision-machined replacement that seals properly and looks better doing it.

Machined from high-grade aluminium and finished in a silver anodized coat, the cap is built for a clean OEM fit and reliable sealing, with the anodizing keeping it corrosion-resistant over time.

What it does:

• Precision-machined aluminium construction
• Reliable sealing performance
• Corrosion-resistant silver anodized finish
• OEM-fit installation for TVS Apache RTX 300

Off-road stops and tight parking lots mean your boots are constantly brushing against the frame and side panels — and over time that adds up to scuffed paint and worn edges. Titan Boot Guards put a tough buffer right where your feet meet the bike.

Machined from premium aluminium with a silver anodized finish, the guards bolt directly onto the existing mounting points and shield the frame and panels from scratches and scuff marks during touring or off-road riding. The anodized coating resists corrosion so the guards keep their finish long after unprotected paint would have started showing wear.

Small parts, real savings — your frame stays scratch-free ride after ride.

What it does:

• Shields frame and side panels from boot scuffs and scratches
• Premium aluminium build, lightweight and durable
• Silver anodized finish resists corrosion
• Direct bolt-on installation, no modification needed

Same problem, lighter answer. The Vector Radiator Grill in Silver protects the same vulnerable radiator core from stone chips and road debris, but does it in aluminium instead of steel — for riders who want the guard without the extra grams.

The grill is laser-cut from high-grade aluminium into a precision mesh pattern, so it blocks debris while keeping airflow open for the cooling system. The natural silver finish is rust and corrosion resistant on its own, and the lightweight build means it adds protection without noticeably adding weight to the front end.

Fit it once and forget about it — your radiator stays covered no matter what the road throws up.

What it does:

• Guards the radiator core against stones and road debris
• Laser-cut aluminium mesh preserves engine airflow
• Lightweight build with no compromise on strength
• Corrosion-resistant silver finish
• Direct fit for TVS Apache RTX 300, no modification needed

A cracked or dented radiator ends a ride faster than almost anything else — one stray pebble kicked up on the highway or a low branch on a trail can punch straight through the fins and leave you stranded with an overheating engine. The Vector Radiator Grill keeps that risk off the table.

Built from high-strength mild steel, the grill uses a precision-cut mesh pattern that blocks flying debris while leaving enough open area for airflow to keep the cooling system working as designed. A black powder-coated finish adds a layer of corrosion resistance so the guard holds up through monsoon rides and daily commutes alike, and it bolts onto the stock mounting points without any drilling or trimming.

Once it's on, you stop thinking about what's ahead on the road and start riding it — the radiator's covered.

What it does:

• Shields the radiator core from stones, debris, and trail impact
• Precision-cut mesh maintains full airflow for engine cooling
• Mild steel construction for durable, long-term protection
• Black powder coating resists rust and corrosion
• Direct bolt-on fit using OEM mounting points

Bungee cords and improvised straps don't cut it once you're loading up saddle bags for a real tour. The Aviator saddlestay gives you a proper mounting base built to carry the weight.

It's made from high-strength mild steel and finished in a matte black powder-coat, engineered to bolt straight onto the Apache RTX 300 without any fabrication. The frame is rigid enough to keep loaded bags steady over highway miles or rough trail sections.

Once fitted, it turns the RTX 300 into a proper long-haul platform: pack it, mount the bags, and go.

What it does:

• High-strength mild steel frame
• Matte black powder-coated finish
• Secure mounting base for saddle bags
• Direct fit installation, no fabrication needed
• Built for touring and off-road loads
• 6-month warranty

Trying to glance at turn-by-turn directions while squinting through glare is a good way to miss your exit, or worse. The Ploigos mount puts your GPS or phone in a fixed, steady spot right in your eyeline, with a built-in extender to cut down windscreen glare.

It's a mild steel and aluminium build that bolts directly onto the Apache RTX 300's factory points, no drilling, no custom brackets, and its vibration-resistant mounting keeps your device steady over rough roads instead of bouncing loose.

What it does:

• Steel and aluminium mount construction
• Integrated visor extender reduces glare
• Vibration-resistant mounting
• Direct bolt-on fit, no modifications needed
• Built for TVS Apache RTX 300

A stock pillion perch can feel small and unstable once you've got a passenger on the back for real distance. The Bolster footrest gives them a wider, steadier platform to plant their feet.

Built from mild steel and finished in a black powder-coat, it bolts straight onto the Apache RTX 300's factory mounting points and holds up to the vibration and knocks of daily riding.

What it does:

• Mild steel construction, black powder-coated finish
• Wider, stable platform for pillion riders
• Direct OEM-fit installation
• 6-month warranty

A worn or plain-looking oil filler cap is one of those small details that quietly ages a motorcycle. This rear oil cap swaps the stock piece for a CNC-machined aluminium unit that seals just as securely while giving the tail section a sharper, finished look.

Machined from high-strength aluminium and finished in a silver anodized coat, it resists corrosion and heat while staying lightweight. The threading and dimensions are built to OEM-perfect specification, so it seats and seals exactly like the factory cap without any modification.

Installation is a straight swap with no tools drama and no fitment guesswork, and once on, it holds up to daily riding and weather without dulling.

What it does:

• CNC-machined aluminium construction
• Silver anodized finish resists corrosion
• OEM-perfect fit and secure sealing
• Lightweight, direct bolt-on replacement
• Built specifically for the TVS Apache RTX 300