A tip-over at low speed often lands directly on the front brake lever and master cylinder — this guard takes that impact so you're not left with a cracked reservoir or bent lever assembly.

What it does:

• Shields the front brake master cylinder and reservoir from impact
• Reduces the risk of lever or reservoir damage in a low-speed drop
• Adds protection without interfering with lever reach or operation

Key details:

• Aluminium construction, lightweight
• Clamps to the handlebar alongside the master cylinder
• Fits Yezdi Adventure

The front brake caliper sits low and forward, right in the path of trail debris and rock strikes — this small guard shields it from impact that could otherwise damage the caliper body or brake line.

What it does:

• Shields the front brake caliper from stone and debris impact
• Protects the brake line routing near the caliper from abrasion
• Adds low-cost insurance against a ride-ending brake issue on the trail

Key details:

• Steel construction, powder-coated black
• Bolts on using the factory caliper mounting hardware
• Fits Yezdi Adventure

Navigating unmarked trails means keeping your GPS or phone where you can actually see it — this handlebar mount puts it in clear view without blocking switchgear or the clocks.

What it does:

• Mounts a GPS unit or phone case securely to the handlebar
• Keeps the display in the rider's direct line of sight
• Holds steady over rough terrain without vibrating loose

Key details:

• Aluminium and steel construction
• Clamps directly to the handlebar, no permanent modification
• Compatible with standard GPS/phone mount ball or clamp systems
• Fits Yezdi Adventure

Mud, water, and grit thrown up by the rear wheel chew through a drive chain fast when it's left exposed — this guard shields the chain run to keep it cleaner for longer between lubes.

What it does:

• Shields the top chain run from mud, dust, and water spray
• Reduces chain wear and the frequency of cleaning and lubrication
• Lowers the risk of debris getting caught between chain and sprocket

Key details:

• Steel construction, powder-coated black
• Direct bolt-on fit at the factory swingarm mounting point
• Fits Yezdi Adventure

The Yezdi Adventure doesn't ship with a clean spot to add auxiliary lighting — this mount gives you a proper bracket to fit fog or spot lamps without improvising with zip ties and hose clamps.

What it does:

• Provides a dedicated mounting point for auxiliary fog or spot lights
• Positions lights clear of the front wheel and forks
• Keeps wiring routing tidy alongside the stock harness

Key details:

• Steel bracket construction, powder-coated black
• Bolts to factory frame mounting points, no drilling required
• Fits standard aftermarket fog lamp clamps
• Fits Yezdi Adventure

A cracked headlight lens mid-ride on the Yezdi Adventure means finishing the day — or the ride home — half-blind after dark. This guard shields the lens from stone chips and branch strikes without blocking the beam.

What it does:

• Shields the headlight lens from stone chips, gravel, and branch impact
• Preserves headlight output with an open mesh design that doesn't restrict light
• Adds a layer of protection during trail riding and transport

Key details:

• Steel wire mesh construction, powder-coated black
• Bolts on around the factory headlight housing, no lens modification needed
• Fits Yezdi Adventure

Stock footpegs are narrow and get slick fast when they're caked in mud — this wider set gives your boots more platform to stand on when the trail gets technical.

What it does:

• Provides a wider platform for stable footing while standing on rough terrain
• Improves grip in wet, muddy, or dusty conditions versus the stock pegs
• Reduces foot fatigue on longer off-road stretches

Key details:

• Steel construction with a serrated grip surface
• Sold as a set (left and right)
• Direct bolt-on replacement for stock footpegs, uses factory mounting pins
• Fits Yezdi Adventure

Skid plates protect the sump, but the engine's side cases are still exposed on a tip-over — this engine guard adds a lower rail specifically to keep the crankcase covers off the ground and off rocks.

What it does:

• Protects the lower engine casing and crankcase covers from ground contact during a fall
• Adds a sacrificial contact point so the engine cases don't take the hit directly
• Complements a crash guard for fuller lower-frame coverage

Key details:

• Mild steel tubing, powder-coated black finish
• Bolts to factory frame mounting points
• Fits Yezdi Adventure

The stock side stand foot on the Yezdi Adventure is small enough to sink straight into mud, sand, or gravel — this extender adds surface area so the bike stays upright on soft ground instead of tipping over at a fuel stop.

What it does:

• Increases the side stand's footprint to prevent sinking on soft or uneven ground
• Improves parking stability on gravel, mud, sand, and grass
• Reduces the risk of the bike toppling over on its stand

Key details:

• Steel construction, powder-coated black
• Fits onto the factory side stand foot
• Fits Yezdi Adventure

Kicked-up stones and branch strikes on the trail go straight for the radiator core on the Yezdi Adventure — a cracked radiator means an overheated engine and a ride that ends early. This stainless mesh guard sits in front of the core to stop debris before it gets there.

What it does:

• Blocks stones, gravel, and debris from reaching the radiator core
• Maintains airflow to the radiator so cooling performance isn't affected
• Reduces the risk of an overheating shutdown from radiator damage on the trail

Key details:

• Stainless steel (SS) mesh construction, corrosion resistant
• Direct bolt-on fit using factory mounting points
• Fits Yezdi Adventure

Panniers and soft luggage need a solid base — this top plate bolts to the rear subframe of the Yezdi Adventure to give you a flat, load-rated mounting surface for a top box or strapped-down gear.

What it does:

• Provides a flat mounting platform for a top box or rear luggage
• Spreads load evenly across the rear subframe instead of stressing a single point
• Keeps strapped luggage stable at speed and on rough roads

Key details:

• Mild steel construction, powder-coated black
• Bolts directly to the factory rear subframe mounting points
• Compatible with most universal top box mounting kits
• Fits Yezdi Adventure

Standing on the pegs over broken terrain gets awkward fast when the bars sit too low and too close to the tank — this riser lifts the handlebar and pulls it back slightly for a more natural standing position on the Yezdi Adventure.

What it does:

• Raises handlebar height for a more upright, comfortable standing and seated riding position
• Reduces strain on wrists and shoulders on long or rough rides
• Retains stock cable and hose routing without added tension

Key details:

• CNC-machined aluminium construction
• Hard anodized finish for durability
• Direct replacement for the stock riser mount, uses factory hardware
• Fits Yezdi Adventure

Not every rider wants the bulk of a full tubular cage — the Pluto crash guard gives the Yezdi Adventure frame and engine basic drop protection in a lighter, lower-profile design that doesn't change the bike's stance.

What it does:

• Protects the engine casing and lower frame from scrapes and impact in a tip-over
• Keeps weight and visual bulk to a minimum compared to a full crash guard
• Bolts to factory mounting points for a clean, integrated look

Key details:

• Mild steel construction, powder-coated black
• Compact mounting design at the factory frame points
• Direct bolt-on fit for Yezdi Adventure, no modification needed

The Yezdi Adventure is built for gravel, mud, and the occasional low-speed tip-over on the trail — and stock engine casings and radiator shrouds don't survive that kind of contact for long. This tubular crash guard wraps the lower frame and engine to take the hit instead of your bodywork.

What it does:

• Shields the engine cases, radiator shrouds, and lower frame rails from impact during drops and slides
• Keeps the bike rideable after a low-speed off instead of ending the trip early
• Distributes crash loads across multiple mounting points instead of concentrating them on the frame

Key details:

• 25mm mild steel tubing, cold-rolled (CR) construction for strength without excess weight
• Black powder-coated finish for corrosion resistance
• Bolts on using existing frame mounting points — no drilling
• Direct fit for Yezdi Adventure

The front brake reservoir sticks out right where a tip-over or a stray branch can crack the plastic housing — and a cracked master cylinder reservoir means a brake fluid leak, not just a cosmetic scuff.

This guard is a stainless steel bracket that wraps around the reservoir body, taking the impact so the plastic housing and lever assembly don't have to.

Clamps on around the existing reservoir without interfering with the brake lever or lines.

What it does:

• Shields the front brake reservoir from impacts and falls
• Clamps around the existing housing — no lines disturbed
• Reduces the risk of a cracked reservoir and fluid leak

Key details

• Brand: MotoTorque
• Material: Stainless steel
• Fitment: Jawa/Yezdi Scrambler
• Mount type: Clamp-on around reservoir

Draft listing — pending final price confirmation and product photos.

The rear brake fluid reservoir sits exposed near the footpeg, right where a tip-over or a stray kerb strike can crack the plastic housing — and a cracked reservoir means a fluid leak, not just a scuff.

This guard is a mild-steel bracket that wraps around the reservoir body, taking the impact so the plastic housing doesn't have to.

Clamps on around the existing reservoir without interfering with the brake lines.

What it does:

• Shields the rear brake fluid reservoir from impacts and falls
• Clamps around the existing housing — no lines disturbed
• Reduces the risk of a cracked reservoir and fluid leak

Key details

• Brand: MotoTorque
• Material: Mild steel, powder-coated
• Fitment: Jawa/Yezdi Scrambler
• Mount type: Clamp-on around reservoir

Draft listing — pending final price confirmation and product photos.

A stray stone at highway speed or a low branch on a trail is all it takes to crack the Scrambler's round headlight lens — usually meaning a full unit replacement rather than a quick fix.

This grill is a perforated steel guard that mounts in front of the headlight, taking the impact from debris while leaving enough open area that beam output isn't noticeably affected.

Bolts to the existing headlight mounting points without needing to remove the unit.

What it does:

• Shields the headlight lens from stones and branch strikes
• Perforated pattern keeps beam output largely unaffected
• Direct bolt-on fit to the factory headlight mounts

Key details

• Brand: MotoTorque
• Material: Mild steel
• Fitment: Jawa/Yezdi Scrambler
• Mount type: Direct bolt-on over headlight

Draft listing — pending final price confirmation and product photos.

Road debris and stray gravel go straight through an unguarded radiator core, and once the fins are dented or clogged, cooling performance drops right when the engine's working hardest.

This guard is a perforated steel screen that mounts in front of the radiator, keeping stones and larger debris out while leaving airflow largely unrestricted.

Direct bolt-on fit over the factory radiator, no cutting into surrounding bodywork.

What it does:

• Screens the radiator core from stones and road debris
• Perforated pattern keeps airflow largely unrestricted
• Direct bolt-on fit over the factory radiator

Key details

• Brand: MotoTorque
• Material: Mild steel
• Fitment: Jawa/Yezdi Scrambler
• Mount type: Direct bolt-on over radiator

Draft listing — pending final price confirmation and product photos.

The Scrambler's stock tail leaves nowhere flat to strap a bag once you're loading up for anything past a short commute — a bungee-and-hope setup on the pillion seat only goes so far.

This carrier is a welded steel platform that mounts to the rear subframe, giving touring luggage a stable base instead of improvised straps.

Sized for the factory subframe mounting points, sitting close to the tail rather than perched above it.

What it does:

• Gives touring luggage a flat, stable mounting surface
• Handles top boxes or strapped duffel bags without flex
• Direct bolt-on fit to the factory subframe points

Key details

• Brand: MotoTorque
• Material: Welded mild steel
• Fitment: Jawa/Yezdi Scrambler
• Mount type: Direct bolt-on to subframe

Draft listing — pending final price confirmation and product photos.

Soft panniers strapped straight to the Scrambler's subframe rub through the paint or brush against the exhaust before long — a problem a proper stay removes entirely.

This saddle stay is a welded steel bracket that bolts to the existing subframe mounts, holding bags clear of the wheel, exhaust, and rear shock once they're loaded and moving with the suspension.

Built for the Scrambler's subframe geometry, lining up with the factory mounting points without extra brackets.

What it does:

• Keeps saddle bags clear of the rear wheel, exhaust heat, and shock
• Protects subframe paint and bodywork from strap wear
• Bolts to factory mounting points, no drilling

Key details

• Brand: MotoTorque
• Material: Welded mild steel
• Fitment: Jawa/Yezdi Scrambler
• Mount type: Direct bolt-on to subframe

Draft listing — pending final price confirmation and product photos.

The Scrambler's exposed single-cylinder engine is styled to be seen, which looks right for the retro build and gets expensive the moment the bike tips over off-road or in a car park.

This crash guard wraps the engine and lower frame in tubular steel, spreading impact across multiple mounting points instead of concentrating it on the cases themselves.

Bolts to the factory frame mounting points, sized to keep the Scrambler's proportions intact rather than adding visible bulk.

What it does:

• Keeps the engine cases off the ground in a tip-over
• Spreads impact across multiple frame mounting points
• Direct bolt-on fit, no fabrication required

Key details

• Brand: MotoTorque
• Material: Tubular mild steel, powder-coated
• Fitment: Jawa/Yezdi Scrambler
• Mount type: Direct bolt-on to factory frame points

Draft listing — pending final price confirmation and product photos.