HARLEY-DAVIDSON X440

The X440's air-cooled single sits low and wide, which suits the cruiser stance but leaves the engine cases and cylinder fins exposed the moment the bike tips over at a light or in a car park.

This crash guard wraps the engine and lower frame in tubular steel, spreading impact across multiple mounting points instead of concentrating it on the cases themselves.

Bolts to the factory frame mounting points, sized to keep the X440's cruiser lines intact rather than adding visible bulk.

What it does:

• Keeps the engine cases and cylinder fins off the ground in a tip-over
• Spreads impact across multiple frame mounting points
• Direct bolt-on fit, no fabrication required

Key details

• Brand: MotoTorque
• Material: Tubular mild steel, powder-coated
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to factory frame points

Draft listing — pending final price confirmation and product photos.

Soft panniers strapped straight to the X440's subframe rub through the paint or brush against the exhaust before long — a problem a proper stay removes entirely.

This saddle stay is a welded steel bracket that bolts to the existing subframe mounts, holding bags clear of the wheel, exhaust, and rear shock once they're loaded and moving with the suspension.

Built for the X440's subframe geometry, lining up with the factory mounting points without extra brackets.

What it does:

• Keeps saddle bags clear of the rear wheel, exhaust heat, and shock
• Protects subframe paint and bodywork from strap wear
• Bolts to factory mounting points, no drilling

Key details

• Brand: MotoTorque
• Material: Welded mild steel
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to subframe

Draft listing — pending final price confirmation and product photos.

The X440's stock tail leaves the pillion with nothing to lean on and nowhere flat to strap a bag — two separate problems that usually mean two separate purchases.

This carrier combines both in one welded steel unit: a flat rear rack for touring luggage plus an integrated backrest pad so the pillion has proper support on longer rides.

Mounts to the factory subframe points in one installation rather than fitting a rack and a backrest separately.

What it does:

• Gives touring luggage a flat, stable mounting surface
• Adds pillion back support in the same unit
• Direct bolt-on fit to the factory subframe points

Key details

• Brand: MotoTorque
• Material: Welded mild steel, padded backrest
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to subframe

Draft listing — pending final price confirmation and product photos.

The X440's stock bar position works fine for shorter riders but leaves taller riders hunched forward slightly — not what you want on a cruiser built for a relaxed, upright seating position.

This riser bolts between the triple clamp and handlebar to lift the bar closer to the rider, opening up the reach without needing a full handlebar swap.

Uses the factory bar clamp and cabling, so there's no need for longer cables or lines in most cases.

What it does:

• Raises the handlebar for a more relaxed, upright reach
• Suits taller riders without a full handlebar swap
• Bolts in using the factory clamp — no cable changes in most cases

Key details

• Brand: MotoTorque
• Material: Machined aluminium
• Fitment: Harley-Davidson X440
• Mount type: Bolt-on between triple clamp and handlebar

Draft listing — pending final price confirmation and product photos.

Not everyone wants the combined rack-and-backrest setup — sometimes a simple flat carrier is all that's needed to strap down a duffel for a weekend ride.

This v2.0 carrier is a standalone welded steel rack that mounts to the rear subframe, revised from the original design for a cleaner fit against the X440's tail section.

Sized for the factory subframe mounting points, sitting flush rather than perched above the tail.

What it does:

• Gives touring luggage a flat, stable mounting surface
• Sits flush with the tail for a cleaner factory-style look
• Direct bolt-on fit to the factory subframe points

Key details

• Brand: MotoTorque
• Material: Welded mild steel
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to subframe

Draft listing — pending final price confirmation and product photos.

A crash guard covers the sides, but the underside of the X440's single-cylinder engine is just as exposed the moment you clip a speed bump too fast or catch a pothole on an uneven road.

This lower guard bolts beneath the engine to take the scrape instead of the cases underneath, sized to clear the exhaust and factory hardware.

Works alongside a crash guard rather than replacing it, covering the underside where a side guard doesn't reach.

What it does:

• Shields the engine underside from kerbs, potholes, and speed bumps
• Clears the exhaust and stock hardware for a clean fit
• Pairs with a crash guard for full lower-body coverage

Key details

• Brand: MotoTorque
• Material: Mild steel, powder-coated
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to factory points

Draft listing — pending final price confirmation and product photos.

Riders who already have a carrier fitted don't need a combo unit — just something for the pillion to lean back on without swapping out the rack they've already got.

This standalone backrest bolts to the rear subframe independently of the carrier, giving the pillion padded support without changing the existing luggage setup.

Mounts using the factory subframe points, positioned to clear the exhaust and rear shock.

What it does:

• Gives the pillion proper back support on longer rides
• Fits independently of an existing back carrier
• Direct bolt-on fit to the factory subframe points

Key details

• Brand: MotoTorque
• Material: Steel frame, padded cushion
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to subframe

Draft listing — pending final price confirmation and product photos.

The stock footpegs are compact and rubber-topped — fine around town, but they don't offer much grip once the road's wet or you're covering real distance and want a more secure platform.

This set swaps in a wider metal footrest with a serrated top surface, giving your boots a more secure platform in any weather.

Bolts to the factory footpeg mounts using the stock pivot and spring hardware.

What it does:

• Wider platform than the stock rubber-topped pegs
• Serrated surface holds grip in wet conditions
• Direct bolt-on fit using factory pivot hardware

Key details

• Brand: MotoTorque
• Material: Mild steel
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on, factory pivot points

Draft listing — pending final price confirmation and product photos.

A stray stone at highway speed or a low branch on a backroad is all it takes to crack the X440's round headlight lens — usually meaning a full unit replacement rather than a quick fix.

This guard is a perforated steel grill that mounts in front of the headlight, taking the impact from debris while leaving enough open area that beam output isn't noticeably affected.

Bolts to the existing headlight mounting points without needing to remove the unit.

What it does:

• Shields the headlight lens from stones and branch strikes
• Perforated pattern keeps beam output largely unaffected
• Direct bolt-on fit to the factory headlight mounts

Key details

• Brand: MotoTorque
• Material: Mild steel
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on over headlight

Draft listing — pending final price confirmation and product photos.

Road debris and stray gravel go straight through an unguarded radiator core, and once the fins are dented or clogged, cooling performance drops right when the engine's working hardest in traffic.

This guard is a perforated stainless steel screen that mounts in front of the radiator, keeping stones and larger debris out while leaving airflow largely unrestricted.

Stainless construction resists corrosion better than a painted mild-steel guard over time.

What it does:

• Screens the radiator core from stones and road debris
• Stainless build resists rust and corrosion long-term
• Direct bolt-on fit over the factory radiator

Key details

• Brand: MotoTorque
• Material: Stainless steel
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on over radiator

Draft listing — pending final price confirmation and product photos.

Road debris and stray gravel go straight through an unguarded radiator core, and once the fins are dented or clogged, cooling performance drops right when the engine's working hardest in traffic.

This guard is a perforated mild-steel screen that mounts in front of the radiator, keeping stones and larger debris out while leaving airflow largely unrestricted — a lower-cost alternative to the stainless version.

Direct bolt-on fit over the factory radiator, no cutting into surrounding bodywork.

What it does:

• Screens the radiator core from stones and road debris
• Perforated pattern keeps airflow largely unrestricted
• Direct bolt-on fit over the factory radiator

Key details

• Brand: MotoTorque
• Material: Mild steel, powder-coated
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on over radiator

Draft listing — pending final price confirmation and product photos.

Zip-tying a phone case to the handlebar works until it doesn't — usually on the one ride where you actually needed the map, on a bike with no factory provision for one.

This mount is a machined bracket that clamps to the handlebar, giving you a stable, vibration-resistant point to run a GPS unit or phone cradle from.

Positions the device within easy sightline without blocking the factory instrument cluster.

What it does:

• Gives a phone or GPS unit a stable, vibration-resistant mount
• Keeps the display in sightline without blocking the dash
• Clamps to the handlebar — no drilling

Key details

• Brand: MotoTorque
• Material: Machined aluminium
• Fitment: Harley-Davidson X440
• Mount type: Handlebar clamp-on

Draft listing — pending final price confirmation and product photos.

The rear brake fluid reservoir sits exposed near the footpeg, right where a tip-over or a stray kerb strike can crack the plastic housing — and a cracked reservoir means a fluid leak, not just a scuff.

This guard is a stainless steel bracket that wraps around the reservoir body, taking the impact so the plastic housing doesn't have to.

Clamps on around the existing reservoir without interfering with the brake lines.

What it does:

• Shields the rear brake fluid reservoir from impacts and falls
• Clamps around the existing housing — no lines disturbed
• Reduces the risk of a cracked reservoir and fluid leak

Key details

• Brand: MotoTorque
• Material: Stainless steel
• Fitment: Harley-Davidson X440
• Mount type: Clamp-on around reservoir

Draft listing — pending final price confirmation and product photos.

The rear brake fluid reservoir sits exposed near the footpeg, right where a tip-over or a stray kerb strike can crack the plastic housing — and a cracked reservoir means a fluid leak, not just a scuff.

This guard is a mild-steel bracket, powder-coated black, that wraps around the reservoir body, taking the impact so the plastic housing doesn't have to.

Clamps on around the existing reservoir without interfering with the brake lines — a lower-cost alternative to the stainless version.

What it does:

• Shields the rear brake fluid reservoir from impacts and falls
• Clamps around the existing housing — no lines disturbed
• Black finish blends with dark-themed builds

Key details

• Brand: MotoTorque
• Material: Mild steel, black powder-coated
• Fitment: Harley-Davidson X440
• Mount type: Clamp-on around reservoir

Draft listing — pending final price confirmation and product photos.

The front brake reservoir sticks out right where a tip-over or a stray branch can crack the plastic housing — and a cracked master cylinder reservoir means a brake fluid leak, not just a cosmetic scuff.

This guard is a stainless steel bracket that wraps around the reservoir body, taking the impact so the plastic housing and lever assembly don't have to.

Clamps on around the existing reservoir without interfering with the brake lever or lines.

What it does:

• Shields the front brake reservoir from impacts and falls
• Clamps around the existing housing — no lines disturbed
• Reduces the risk of a cracked reservoir and fluid leak

Key details

• Brand: MotoTorque
• Material: Stainless steel
• Fitment: Harley-Davidson X440
• Mount type: Clamp-on around reservoir

Draft listing — pending final price confirmation and product photos.

The front brake reservoir sticks out right where a tip-over or a stray branch can crack the plastic housing — and a cracked master cylinder reservoir means a brake fluid leak, not just a cosmetic scuff.

This guard is a mild-steel bracket that wraps around the reservoir body, taking the impact so the plastic housing and lever assembly don't have to — a lower-cost alternative to the stainless version.

Clamps on around the existing reservoir without interfering with the brake lever or lines.

What it does:

• Shields the front brake reservoir from impacts and falls
• Clamps around the existing housing — no lines disturbed
• Reduces the risk of a cracked reservoir and fluid leak

Key details

• Brand: MotoTorque
• Material: Mild steel, powder-coated
• Fitment: Harley-Davidson X440
• Mount type: Clamp-on around reservoir

Draft listing — pending final price confirmation and product photos.

Soft bags work for a weekend but start showing their limits the moment weather turns or you need to lock valuables away at a fuel stop — a hard case solves both problems at once.

The Fort Knox TC is a 45-litre aluminium top box that mounts to the rear rack, with an integrated backrest pad so the pillion gets support in the same fitment. Aluminium construction sheds water and holds its shape better than fabric luggage under load.

Bolts onto a compatible rear carrier base rather than requiring permanent modification to the subframe.

What it does:

• 45-litre lockable aluminium storage for touring gear
• Integrated backrest pad supports the pillion in the same unit
• Weatherproof aluminium shell holds its shape under load

Key details

• Brand: LEGUNDARY
• Material: Aluminium, 45L capacity
• Fitment: Harley-Davidson X440 (requires compatible rear carrier)
• Mount type: Bolt-on to rear carrier base

Draft listing — pending final price confirmation and product photos.

A stray stone at highway speed or a low branch on a backroad is all it takes to crack the X440's round headlight lens — usually meaning a full unit replacement rather than a quick fix.

The Mig grill is a perforated steel guard that mounts in front of the headlight, taking the impact from debris while leaving enough open area that beam output isn't noticeably affected.

Bolts to the existing headlight mounting points without needing to remove the unit.

What it does:

• Shields the headlight lens from stones and branch strikes
• Perforated pattern keeps beam output largely unaffected
• Direct bolt-on fit to the factory headlight mounts

Key details

• Brand: LEGUNDARY
• Material: Mild steel
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on over headlight

Draft listing — pending final price confirmation and product photos.

The X440's air-cooled single sits low and wide, which suits the cruiser stance but leaves the engine cases and cylinder fins exposed the moment the bike tips over at a light or in a car park.

The Thanos guard wraps the engine and lower frame in tubular steel with an added slider puck at the contact point, so the bike slides on the puck rather than grinding the guard tubing itself into the ground.

Bolts to the factory frame mounting points, sized to keep the X440's cruiser lines intact.

What it does:

• Keeps the engine cases and cylinder fins off the ground in a tip-over
• Slider puck reduces scraping and lets the bike slide on impact
• Direct bolt-on fit, no fabrication required

Key details

• Brand: LEGUNDARY
• Material: Tubular mild steel with slider puck
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to factory frame points

Draft listing — pending final price confirmation and product photos.

Soft panniers work for a weekend but start showing their limits the moment weather turns or you need to lock valuables away at a fuel stop — a hard case solves both problems at once.

The Fort Knox SB is a 36-litre aluminium side box that mounts via a saddle stay or side rack, giving lockable, weatherproof storage that holds its shape under load in a way soft luggage can't.

Requires a compatible saddle stay for mounting — sold separately if not already fitted.

What it does:

• 36-litre lockable aluminium storage per side
• Weatherproof shell holds its shape under load
• Mounts via a compatible saddle stay or side rack

Key details

• Brand: LEGUNDARY
• Material: Aluminium, 36L capacity
• Fitment: Harley-Davidson X440 (requires compatible saddle stay)
• Mount type: Bolt-on to saddle stay/side rack

Draft listing — pending final price confirmation and product photos.

The stock side stand foot is small enough to sink into soft ground or gravel, leaving the bike leaning at an angle you don't notice until you've let go of the bars.

This base clamps over the factory stand foot to widen the contact patch, spreading the bike's weight over more surface so it holds its footing on softer parking spots.

Slips over the existing stand foot — no modification to the side stand itself.

What it does:

• Widens the side stand's footprint on sand, gravel, and soft ground
• Reduces the chance of the stand sinking and the bike tipping
• Clamps over the factory stand foot — no permanent modification

Key details

• Brand: LEGUNDARY
• Material: Machined aluminium
• Fitment: Harley-Davidson X440
• Mount type: Clamp-on over stock side stand foot

Draft listing — pending final price confirmation and product photos.

The X440's stock tail leaves nowhere flat to strap a bag once you're loading up for anything past a short commute — a bungee-and-hope setup on the pillion seat only goes so far.

The Gopher carrier is a welded steel platform that bolts to the rear subframe, giving touring luggage a stable base or a mounting point for a compatible top box.

Sized for the factory subframe mounting points, sitting close to the tail rather than perched above it.

What it does:

• Gives touring luggage a flat, stable mounting surface
• Doubles as a mounting base for a compatible top box
• Direct bolt-on fit to the factory subframe points

Key details

• Brand: LEGUNDARY
• Material: Welded steel
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on to subframe

Draft listing — pending final price confirmation and product photos.

Road debris and stray gravel go straight through an unguarded radiator core, and once the fins are dented or clogged, cooling performance drops right when the engine's working hardest in traffic.

The Vector grill is a perforated aluminium guard that mounts directly in front of the radiator, screening out stones and debris while keeping airflow largely unrestricted.

Aluminium build keeps weight down and resists corrosion better than painted mild steel over time.

What it does:

• Screens the radiator core from stones and trail debris
• Aluminium build resists corrosion long-term
• Direct bolt-on fit over the factory radiator

Key details

• Brand: LEGUNDARY
• Material: Aluminium
• Fitment: Harley-Davidson X440
• Mount type: Direct bolt-on over radiator

Draft listing — pending final price confirmation and product photos.