The Yezdi Adventure is built for gravel, mud, and the occasional low-speed tip-over on the trail — and stock engine casings and radiator shrouds don't survive that kind of contact for long. This tubular crash guard wraps the lower frame and engine to take the hit instead of your bodywork.

What it does:

• Shields the engine cases, radiator shrouds, and lower frame rails from impact during drops and slides
• Keeps the bike rideable after a low-speed off instead of ending the trip early
• Distributes crash loads across multiple mounting points instead of concentrating them on the frame

Key details:

• 25mm mild steel tubing, cold-rolled (CR) construction for strength without excess weight
• Black powder-coated finish for corrosion resistance
• Bolts on using existing frame mounting points — no drilling
• Direct fit for Yezdi Adventure

Not every rider wants the bulk of a full tubular cage — the Pluto crash guard gives the Yezdi Adventure frame and engine basic drop protection in a lighter, lower-profile design that doesn't change the bike's stance.

What it does:

• Protects the engine casing and lower frame from scrapes and impact in a tip-over
• Keeps weight and visual bulk to a minimum compared to a full crash guard
• Bolts to factory mounting points for a clean, integrated look

Key details:

• Mild steel construction, powder-coated black
• Compact mounting design at the factory frame points
• Direct bolt-on fit for Yezdi Adventure, no modification needed

Standing on the pegs over broken terrain gets awkward fast when the bars sit too low and too close to the tank — this riser lifts the handlebar and pulls it back slightly for a more natural standing position on the Yezdi Adventure.

What it does:

• Raises handlebar height for a more upright, comfortable standing and seated riding position
• Reduces strain on wrists and shoulders on long or rough rides
• Retains stock cable and hose routing without added tension

Key details:

• CNC-machined aluminium construction
• Hard anodized finish for durability
• Direct replacement for the stock riser mount, uses factory hardware
• Fits Yezdi Adventure

Panniers and soft luggage need a solid base — this top plate bolts to the rear subframe of the Yezdi Adventure to give you a flat, load-rated mounting surface for a top box or strapped-down gear.

What it does:

• Provides a flat mounting platform for a top box or rear luggage
• Spreads load evenly across the rear subframe instead of stressing a single point
• Keeps strapped luggage stable at speed and on rough roads

Key details:

• Mild steel construction, powder-coated black
• Bolts directly to the factory rear subframe mounting points
• Compatible with most universal top box mounting kits
• Fits Yezdi Adventure

Kicked-up stones and branch strikes on the trail go straight for the radiator core on the Yezdi Adventure — a cracked radiator means an overheated engine and a ride that ends early. This stainless mesh guard sits in front of the core to stop debris before it gets there.

What it does:

• Blocks stones, gravel, and debris from reaching the radiator core
• Maintains airflow to the radiator so cooling performance isn't affected
• Reduces the risk of an overheating shutdown from radiator damage on the trail

Key details:

• Stainless steel (SS) mesh construction, corrosion resistant
• Direct bolt-on fit using factory mounting points
• Fits Yezdi Adventure

The stock side stand foot on the Yezdi Adventure is small enough to sink straight into mud, sand, or gravel — this extender adds surface area so the bike stays upright on soft ground instead of tipping over at a fuel stop.

What it does:

• Increases the side stand's footprint to prevent sinking on soft or uneven ground
• Improves parking stability on gravel, mud, sand, and grass
• Reduces the risk of the bike toppling over on its stand

Key details:

• Steel construction, powder-coated black
• Fits onto the factory side stand foot
• Fits Yezdi Adventure

Skid plates protect the sump, but the engine's side cases are still exposed on a tip-over — this engine guard adds a lower rail specifically to keep the crankcase covers off the ground and off rocks.

What it does:

• Protects the lower engine casing and crankcase covers from ground contact during a fall
• Adds a sacrificial contact point so the engine cases don't take the hit directly
• Complements a crash guard for fuller lower-frame coverage

Key details:

• Mild steel tubing, powder-coated black finish
• Bolts to factory frame mounting points
• Fits Yezdi Adventure

Stock footpegs are narrow and get slick fast when they're caked in mud — this wider set gives your boots more platform to stand on when the trail gets technical.

What it does:

• Provides a wider platform for stable footing while standing on rough terrain
• Improves grip in wet, muddy, or dusty conditions versus the stock pegs
• Reduces foot fatigue on longer off-road stretches

Key details:

• Steel construction with a serrated grip surface
• Sold as a set (left and right)
• Direct bolt-on replacement for stock footpegs, uses factory mounting pins
• Fits Yezdi Adventure

A cracked headlight lens mid-ride on the Yezdi Adventure means finishing the day — or the ride home — half-blind after dark. This guard shields the lens from stone chips and branch strikes without blocking the beam.

What it does:

• Shields the headlight lens from stone chips, gravel, and branch impact
• Preserves headlight output with an open mesh design that doesn't restrict light
• Adds a layer of protection during trail riding and transport

Key details:

• Steel wire mesh construction, powder-coated black
• Bolts on around the factory headlight housing, no lens modification needed
• Fits Yezdi Adventure

The Yezdi Adventure doesn't ship with a clean spot to add auxiliary lighting — this mount gives you a proper bracket to fit fog or spot lamps without improvising with zip ties and hose clamps.

What it does:

• Provides a dedicated mounting point for auxiliary fog or spot lights
• Positions lights clear of the front wheel and forks
• Keeps wiring routing tidy alongside the stock harness

Key details:

• Steel bracket construction, powder-coated black
• Bolts to factory frame mounting points, no drilling required
• Fits standard aftermarket fog lamp clamps
• Fits Yezdi Adventure

Mud, water, and grit thrown up by the rear wheel chew through a drive chain fast when it's left exposed — this guard shields the chain run to keep it cleaner for longer between lubes.

What it does:

• Shields the top chain run from mud, dust, and water spray
• Reduces chain wear and the frequency of cleaning and lubrication
• Lowers the risk of debris getting caught between chain and sprocket

Key details:

• Steel construction, powder-coated black
• Direct bolt-on fit at the factory swingarm mounting point
• Fits Yezdi Adventure

Navigating unmarked trails means keeping your GPS or phone where you can actually see it — this handlebar mount puts it in clear view without blocking switchgear or the clocks.

What it does:

• Mounts a GPS unit or phone case securely to the handlebar
• Keeps the display in the rider's direct line of sight
• Holds steady over rough terrain without vibrating loose

Key details:

• Aluminium and steel construction
• Clamps directly to the handlebar, no permanent modification
• Compatible with standard GPS/phone mount ball or clamp systems
• Fits Yezdi Adventure

The front brake caliper sits low and forward, right in the path of trail debris and rock strikes — this small guard shields it from impact that could otherwise damage the caliper body or brake line.

What it does:

• Shields the front brake caliper from stone and debris impact
• Protects the brake line routing near the caliper from abrasion
• Adds low-cost insurance against a ride-ending brake issue on the trail

Key details:

• Steel construction, powder-coated black
• Bolts on using the factory caliper mounting hardware
• Fits Yezdi Adventure

A tip-over at low speed often lands directly on the front brake lever and master cylinder — this guard takes that impact so you're not left with a cracked reservoir or bent lever assembly.

What it does:

• Shields the front brake master cylinder and reservoir from impact
• Reduces the risk of lever or reservoir damage in a low-speed drop
• Adds protection without interfering with lever reach or operation

Key details:

• Aluminium construction, lightweight
• Clamps to the handlebar alongside the master cylinder
• Fits Yezdi Adventure