Products

🚚 Free shipping included — no extra delivery charge on this item, anywhere in India.

Your CB350 can only make as much power as the air it breathes. Swap the stock paper element for a BMC and you give the engine a cleaner, freer lungful every time you open the throttle.

Instead of disposable paper, BMC builds this filter from multiple layers of oil-treated cotton gauze held in an epoxy-coated alloy mesh. The result is a filter that flows more air while actually trapping finer dust — down to 7 microns, where the standard paper unit stops at around 10. On Kerala roads, where fine red dust finds its way into everything, that difference matters for engine life, not just performance.

The whole filter is formed as one moulded piece — no joints, no weld seams, no weak points for unfiltered air to sneak past. It seals airtight in the stock airbox and drops straight in with zero modification: what the paper filter came out of, this goes into.

What you'll notice on the road: a crisper response when you crack the throttle, smoother pull through the rev range, and — many riders report — a small bump in fuel efficiency once the engine breathes easier.

Buy once, clean forever. This filter arrives pre-oiled and ready to fit. When it loads up with dust, wash it with a BMC regeneration kit, re-oil, and it's good as new — no more throwing filters (and money) away at every service.

Description

BOBO BM1 Jaw-Grip Bike Phone Holder (with fast USB 3.0 charger) Motorcycle Mobile Mount

Anyone who's run Google Maps on a long ride knows how the story ends: navigation on, screen at full brightness, and a battery that's gone by lunchtime. The BOBO BM1 rewrites that ending — it's a phone mount with a QC 3.0 fast charger built directly into it, so your phone charges while it navigates.

The charger isn't an afterthought. It's a Quick Charge 3.0 unit with 6V–3A output — genuinely wall-charger speed, not the trickle you get from cheap USB ports. Wired into your bike's electrical system with the included 1.5-metre cable (with an inline fuse for safety), it means your phone comes off the mount at the end of a full day's riding with more charge than it started with.

Holding the phone is the same jaw-grip system the rest of BOBO's range is known for: spring-loaded arms gripping from the sides, tightened with the side knob, with your screen, buttons, and — importantly here — your charging port all fully accessible.

It fits phones from 4.0 to 7.0 inches, and the box includes everything for a DIY install: handlebar buckle with spacers for 22mm, 25mm, and 32mm bars, a rearview mirror mount for scooters, hex key, a spare fuse, and cable ties to route the wiring cleanly.

Who this is for: touring riders, delivery riders, and anyone whose phone works a full shift on the handlebar. If your rides are short and your battery survives them, a standard BM4 does the job — the BM1 is for when it doesn't.

Backed by a 1-year replacement warranty.

Key details

• Brand: BOBO
• Model: BM1 — Jaw-Grip with built-in USB QC 3.0 charger
• Charger: Quick Charge 3.0, 6V–3A output — charges at wall-charger speed
• Wiring: 1.5m cable with inline fuse, connects to the bike's electrical system
• Fits phones: 4.0" to 7.0" screen size
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Ports & buttons remain fully accessible (including the charging port)
• Mounting: handlebar (22/25/32mm buckle & spacers) or rearview mirror mount — both included
• Includes: mount, 1.5m wire with fuse, spare fuse, cable ties, mirror mount, buckle & spacers, hex key
• Warranty: 1-year replacement warranty

The regular BM1 solves your battery problem. The BM1 PRO solves the next one: what happens to a wired-in phone mount when you park somewhere you don't fully trust.

It starts with the same built-in QC 3.0 fast charger as the standard BM1 — 6V–3A output, genuinely wall-charger speed, wired into your bike so your phone charges while it navigates. The PRO adds an SAE connector into that wiring, sitting between the mount and the bike's electrical line. Instead of leaving a charging mount permanently bolted to your handlebar when you walk away, you disconnect it at the SAE plug and take the whole unit with you — no tools, a few seconds, done.

Holding the phone is BOBO's familiar jaw-grip: spring-loaded arms tightened via the side knob, gripping from the sides only so your screen, buttons, and charging port stay fully usable. It fits phones from 4.0 to 7.0 inches.

The box includes both a handlebar mount and a rearview mirror mount, so it fits bikes and scooters alike, plus the full set of installation accessories — metal buckle and spacers, hex key, wiring with inline fuse, and a spare fuse.

Choose the PRO over the standard BM1 if you park somewhere public or unattended often, and you'd rather unclip a wired mount and pocket it than leave it exposed. Same fast charging, with a genuine answer to "what if someone just takes it."

Backed by a 1-year replacement warranty.

Key details

• Brand: BOBO
• Model: BM1 PRO — Jaw-Grip with USB QC 3.0 Charger + SAE Connector
• Charger: Quick Charge 3.0, 6V–3A output — wall-charger speed
• SAE connector: quick-detach the entire unit from the bike's wiring for portability/theft prevention
• Fits phones: 4.0" to 7.0" screen size
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Ports & buttons remain fully accessible (including charging port)
• Mounting: handlebar and rearview mirror mount both included
• Includes: mount, wiring with inline fuse + spare fuse, buckle & spacers, mirror mount, hex key, fast USB cable
• Warranty: 1-year replacement warranty

Rain protects your phone from water. It does nothing about the buzz coming through your handlebar every kilometre. The BM10H PRO covers both — BOBO's sealed waterproof sleeve, now with a vibration controller built in to protect your phone from the road as well as the weather.

Like the standard BM10, this isn't an open jaw-grip — your phone sits fully enclosed in a weatherproof silicone sleeve, with a transparent front film that keeps the touchscreen fully responsive and a cutout that keeps your camera usable, sealed shut. Inside, a rebound base keeps the phone from shifting around on rough roads. What's new on the PRO is the vibration controller working underneath all of that, absorbing engine and road buzz before it reaches the phone itself — meaningful on longer rides, where constant vibration is what actually wears out a phone's camera and internals over time.

It fits phones from 4.0 to 7.0 inches and mounts to most handlebars, with tools included for a straightforward DIY install.

Choose this over the standard BM10 if your rides are long, your roads are rough, or you simply want both problems — water and vibration — solved by the same mount instead of just one.

Backed by a 1-year warranty.

Key details

• Brand: BOBO
• Model: BM10H PRO — Fully Waterproof Sleeve with Vibration Controller
• Design: fully enclosed waterproof silicone sleeve — not an open jaw-grip
• Touchscreen: fully responsive through the transparent front film
• Camera: usable through a dedicated lens cutout
• Added feature: built-in vibration controller to dampen road buzz reaching the phone
• Fits phones: 4.0" to 7.0" screen size
• Stability: rebound base restricts phone movement inside the holder
• Mounting: handlebar
• Includes: mount, installation tools
• Warranty: 1-year replacement warranty

Monsoon riding usually means one of two choices: leave the phone in your pocket and ride blind, or mount it and hope the rain doesn't get in. The BOBO BM10 isn't a hope-based solution — it's a fully sealed waterproof case built to keep your phone mounted and working, rain or shine.

Unlike a jaw-grip mount that just holds your phone from the sides, the BM10 fully encloses it in a weatherproof silicone sleeve. A transparent film over the front means your touchscreen still responds normally and your camera lens stays clear and usable, even with the case sealed shut. Inside, a rebound base cushions the phone and stops it shifting around on rough roads, so it rides as steady as it stays dry.

It fits phones from 4.0 to 7.0 inches and installs with metal spacers and tools included in the box — no extra hardware to source.

Choose your mount: this listing covers both fitments — H for a direct handlebar mount, or M for a long rearview mirror mount, better suited to scooters where handlebar space is tight. Pick the one that matches your bike when ordering.

Built for riders who don't stop for weather. If you ride through Kerala's monsoon, wash your bike with the phone still mounted, or just want one less thing to worry about on a wet morning commute, this is the mount built for exactly that.

Backed by a 1-year replacement warranty.

Key details

• Brand: BOBO
• Model: BM10H (handlebar) / BM10M (long rearview mirror mount)
• Design: fully enclosed waterproof silicone sleeve — not an open jaw-grip
• Touchscreen: fully responsive through the transparent front film
• Camera: usable through a dedicated lens cutout
• Fits phones: 4.0" to 7.0" screen size
• Stability: rebound base restricts phone movement inside the holder on rough roads
• Mounting: handlebar (H variant) or rearview mirror (M variant) — choose at checkout
• Includes: mount, metal spacers, installation tools
• Warranty: 1-year replacement warranty

This sits at the top of BOBO's waterproof range — everything the standard BM10 protects your phone from, plus BOBO's strongest damping tier working underneath it.

Like the rest of the BM10 family, your phone doesn't sit in an open grip — it's fully enclosed in a sealed, weatherproof case, with a transparent front film that keeps the touchscreen completely responsive and a lens cutout that keeps your camera usable, all while sealed against rain, splashes, and road dust. The PRO PLUS adds an advanced vibration damper into that same sealed housing, absorbing handlebar and engine buzz before it reaches the phone — protection aimed specifically at the internals and camera that take the real long-term wear from constant vibration.

It fits phones from 4.0 to 7.0 inches and mounts on standard handlebar diameters — 22mm, 25mm, and 32mm — with the metal buckle, spacers, and hex key included.

Where this fits in your range: if the standard BM10 handles weather and the BM10H PRO adds vibration protection, the PRO PLUS is the strongest version of both combined — the one to recommend to riders who tour long distances through variable weather and don't want to compromise on either front.

Backed by a 1-year warranty against manufacturing defects.

Key details

• Brand: BOBO
• Model: BM10H/M PRO PLUS — Fully Waterproof Sleeve with PRO PLUS Vibration Damper
• Design: fully enclosed waterproof case — not an open jaw-grip
• Touchscreen: fully responsive through the transparent front film
• Camera: usable through a dedicated lens cutout
• Added feature: PRO PLUS vibration damper — BOBO's strongest damping tier, protects internals and camera from road/engine vibration
• Fits phones: 4.0" to 7.0" screen size
• Handlebar fit: 22mm, 25mm, 32mm diameter (buckle & spacers included)
• Mounting: handlebar (H) or rearview mirror (M) — confirm variant when ordering
• Includes: main unit with attached vibration damper, metal buckle, spacers, hex key
• Warranty: 1-year replacement warranty

Waterproofing keeps your phone safe from the weather. Charging keeps it alive for the ride. The BM11H/M is where BOBO brings both together — a fully sealed mount that also keeps your phone topped up, rain or shine.

Your phone sits inside a sealed waterproof case, not an open grip — a transparent front film keeps the touchscreen fully responsive, and a camera cutout keeps your lens usable, all while sealed against rain and road spray. Built into that same housing is a 15W fast wireless charger for any Qi-enabled phone, plus a USB-C port that works as both input and output — charge your phone, or use it the other way if you ever need to power something else from your device. The mount wires into your bike's electrical system through an SAE connector, so the charging is genuinely powered, not a passive gimmick.

It fits phones from 4.0 to 7.0 inches, and installation is straightforward with the mounting hardware and tools included.

Choose your fitment: this listing covers both the H (direct handlebar mount) and M (long rearview mirror mount for scooters) variants — pick the one that matches your bike.

Worth setting expectations on: as with any wireless charging mount, performance is best with your phone case off or with a thin case — thick or magnetic cases can slow the charging speed.

Key details

• Brand: BOBO
• Model: BM11H (handlebar) / BM11M (long rearview mirror mount)
• Design: fully enclosed waterproof case — not an open jaw-grip
• Touchscreen: fully responsive through the transparent front film
• Camera: usable through a dedicated lens cutout
• Charging: 15W fast wireless (Qi-enabled phones) + USB-C input/output port
• Power: wired into the bike's electrical system via SAE connector
• Fits phones: 4.0" to 7.0" screen size
• Mounting: handlebar (H) or rearview mirror (M) — choose at checkout
• Best wireless charging performance with no case or a thin case

Every time you park, you face the same choice: leave your phone on the bike and hope, or spend thirty fiddly seconds unscrewing the knob to take it with you. The BM14 removes that choice entirely — one quick-release buckle, and your phone's off the mount before you've even taken your helmet off.

It still uses BOBO's jaw-grip system to hold the phone itself — spring-loaded arms gripping from the sides, tightened via the side knob, keeping every button and port reachable. The difference is what happens after: instead of loosening the whole grip to remove your phone, the quick-release buckle lets you pop the entire mount head off and back on in seconds, while the grip stays set to your phone's size. Park, unclip, walk away with your phone. Come back, clip it in, ride off.

It fits phones from 4.0 to 7.0 inches and installs on either your handlebar or your rearview mirror — both mounting accessories and tools are included in the box, so you pick what suits your bike.

Built for how riders actually use their phones — on the bike for navigation, off the bike the second you stop, without treating it like a fixed accessory. Backed by a 1-year warranty.

Key details

• Brand: BOBO
• Model: BM14 — Jaw-Grip with Quick Release
• Fits phones: 4.0" to 7.0" screen size
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Quick-release buckle: detach/reattach the phone mount in seconds without loosening the grip
• Mounting: handlebar or rearview mirror (both accessories included)
• Ports & buttons remain fully accessible while mounted
• Includes: mount, mounting accessories, installation tools
• Warranty: 1-year replacement warranty

Most riders end up choosing between two things: a mount that comes off fast when you park, or one that protects your phone from vibration on the ride. The BM14 PRO PLUS is for riders who don't want to choose — it's BOBO's quick-release buckle and their strongest PRO PLUS vibration damper, built into one mount.

On the ride, the PRO PLUS damper takes the edge off engine buzz and rough roads before it ever reaches your phone — the same protection BOBO's dedicated damped mounts offer, not a lighter version bolted on. The jaw-grip holds the phone itself from the sides, tightened via the side knob, keeping your screen, buttons, and ports completely usable while mounted. And when you park, the quick-release buckle lets you unclip the whole mount head and walk away with your phone in seconds — no unscrewing, no fumbling.

It fits phones from 4.0 to 7.0 inches and mounts to either your handlebar or rearview mirror, with every accessory and tool needed for a DIY install included in the box.

This is the top of BOBO's BM4/BM14 mount family — if you want both the fastest phone removal and the strongest vibration protection in one product rather than picking a single strength, this is the one to stock as your premium option.

Includes mounting accessories, tools, and a 1-year warranty.

Key details

• Brand: BOBO
• Model: BM14 PRO PLUS — Jaw-Grip, Quick Release + PRO PLUS Vibration Controller
• Fits phones: 4.0" to 7.0" screen size
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Quick-release buckle: detach/reattach the mount head in seconds
• PRO PLUS vibration controller: BOBO's strongest damping tier, protects the phone from road shock
• Mounting: handlebar or rearview mirror
• Ports & buttons remain fully accessible while mounted
• Includes: mount, mounting accessories, installation tools
• Warranty: 1-year replacement warranty

Sitting at the top of BOBO's quick-release family, the BM14 PRO X pairs their fastest phone-removal system with their most advanced vibration protection yet — the PRO X controller, built to handle the kind of high-intensity, high-frequency buzz that standard dampers let through.

The jaw-grip does the holding, same trusted mechanism across the range: spring-loaded arms tightened via the side knob, gripping from the sides so your screen, buttons, and ports stay fully usable. The quick-release buckle lets you unclip the whole mount head in seconds when you park, without loosening the grip itself. What sets the PRO X apart is what's absorbing the shake underneath all of that — a more capable damping controller aimed at protecting your phone's more sensitive components, particularly the camera, on the roughest, highest-vibration rides.

It fits phones from 4.0 to 7.0 inches and rotates a full 360 degrees, so you can angle the screen exactly how you want it whether you're checking navigation or mounted for a video call at a stop.

Where this sits in the lineup: if the BM14 PRO PLUS is BOBO's strongest quick-release + damping combo you've stocked so far, the PRO X is positioned as their newer, further-enhanced vibration tier on the same quick-release platform. For riders chasing the smoothest possible ride for their phone specifically, this is the one to point them to.

Backed by a 1-year warranty.

Key details

• Brand: BOBO
• Model: BM14 PRO X — Jaw-Grip, Quick Release + PRO X Vibration Controller
• Fits phones: 4.0" to 7.0" screen size
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Quick-release buckle: detach/reattach the mount head in seconds
• PRO X vibration controller: advanced damping aimed at high-intensity, high-frequency road vibration
• Rotation: 360 degrees for flexible viewing angle
• Ports & buttons remain fully accessible while mounted
• Mounting: handlebar or rearview mirror
• Includes: mount, mounting accessories, installation tools
• Warranty: 1-year replacement warranty

Most phone mounts optimise for one thing — grip, speed, or weather. The BM22H/M PRO is built around a different priority entirely: keeping the mount itself from becoming a target the second you walk away from your bike.

Instead of the jaw-grip system used across the rest of the range, the BM22 PRO holds your phone with an ultra-strong socket-arm design, reinforced with anti-vibration shock absorbers to keep the phone steady through rough roads. The standout feature is the anti-theft double socket arm — a locking mechanism built specifically to make the mount harder to simply lift off and walk away with compared to a standard single-socket ball mount, giving you real peace of mind parking in busy or unfamiliar areas.

It fits smartphones from 4.0 to 7.0 inches, and installation is DIY-friendly out of the box: the buckle and spacers support four handlebar diameters — 22mm, 25mm, 28mm, and 32mm — covering essentially every bike and scooter handlebar on the road, with two hex key sizes included for the fitting.

Choose the H or M variant depending on your bike: the H fits directly to your handlebar, while the M uses a metal rearview mirror mount, better suited to scooters with limited handlebar space.

Who this is for: riders who park in public, at work, or anywhere they can't keep an eye on the bike — where a fast-detach mount is a liability, not a convenience. This is the "built to stay put" option in the range.

Backed by a 1-year replacement warranty for manufacturing defects (normal wear and tear excluded).

Key details

• Brand: BOBO
• Model: BM22H (handlebar) / BM22M (mirror) PRO — Anti-Theft, Anti-Vibration
• Grip mechanism: ultra-strong socket-arm mount with anti-vibration shock absorbers
• Security feature: anti-theft double socket arm, harder to detach than a standard single-socket mount
• Fits phones: 4.0" to 7.0" screen size
• Handlebar fit: 22mm, 25mm, 28mm, 32mm diameter (buckle & spacers included)
• Mounting: handlebar (H variant, buckle & spacers) or rearview mirror (M variant, metal mount) — choose at checkout
• Includes: main unit, buckle & spacers (H) or mirror mount (M), anti-theft double socket arm, 2 hex keys
• Warranty: 1-year replacement warranty (manufacturing defects; excludes wear and tear)

This is BOBO's answer to riders who don't want to compromise on any of it — holding power, vibration protection, fast charging, and the ability to grab your phone and go the moment you park. The BM24 PRO PLUS brings all four together in one mount.

At its core is the familiar jaw-grip, holding your phone from the sides so every button and port stays reachable, backed by BOBO's PRO PLUS vibration damper — their strongest damping tier, built to protect your phone's internals and camera from the buzz of a long ride rather than just holding it in place. Wired in is a genuine 36W USB-C fast charger, quick enough to actually build charge back during a ride, not just slow the drain from navigation and screen time. And when you're ready to park, the quick-release buckle lets you unclip the whole mount head in seconds — no tools, no loosening the grip.

It's built for bikes and cycles alike, with a stable, secure hold designed to stay smooth and steady even on rough surfaces, while everything — charging, damping, quick-release — works together rather than as separate bolted-on features.

Who this is for: riders who'd otherwise be choosing between a charging mount, a vibration-damped mount, and a quick-release mount, and would rather just have the one that does all three properly.

Key details

• Brand: BOBO
• Model: BM24 PRO PLUS — Quick Release, PRO PLUS Vibration Damper, 36W USB-C Charger
• Charging: 36W USB-C fast charging (wired)
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• PRO PLUS vibration damper: BOBO's strongest damping tier, protects phone internals and camera
• Quick-release buckle: detach/reattach the mount head in seconds
• Ports & buttons remain fully accessible while mounted
• Suitable for: motorcycles, scooters, and bicycles

Every ride starts the same way now — phone up on the bars, navigation on, and a small prayer that it survives the next pothole. The BOBO BM4 is built to remove that last part entirely.

The jaw-grip mechanism holds your phone from the sides using two spring-loaded arms, tightened with a simple side knob rather than stretchy bands or foam inserts that wear out. Turn the knob until it's snug, and the grip stays put — vibration, potholes, speed bumps, none of it. Because the phone is held from the edges only, your screen stays fully visible and every button and port stays reachable while it's mounted.

It fits phones from 4.0 to 7.0 inches, which covers nearly everything on the market today, from compact phones to the larger screens most riders now carry for maps and navigation apps.

Fits how you actually ride: the BM4 mounts to your handlebar with an included metal buckle and spacers sized for the three most common handlebar diameters — 22mm, 25mm, and 32mm — plus a hex key to tighten it down. A rearview mirror mount is also included for scooters where handlebar space is tight. One box, both mounting options, your choice.

Built for daily use, backed for a year. The BM4 comes with a 1-year replacement warranty, so a manufacturing fault doesn't come out of your pocket.

Key details

• Brand: BOBO
• Model: BM4 — Jaw-Grip Mobile Mount
• Fits phones: 4.0" to 7.0" screen size
• Mounting: handlebar clamp (22mm / 25mm / 32mm, buckle + spacers included) or rearview mirror mount (included for scooters)
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Ports & buttons remain fully accessible while mounted
• Includes: mount, handlebar buckle & spacers, mirror mount, hex key
• Warranty: 1-year replacement warranty

A phone mount that holds your phone tight is only half the job. The other half is what constant engine buzz and road vibration do to your phone's camera and internals over months of riding — and that's the problem the BM4 PRO is actually built to solve.

It starts with the same jaw-grip system as the standard BM4: spring-loaded arms that lock your phone from the sides via a side knob, keeping every button and port free. What sets the PRO apart is the vibration controller built into the mount itself — it absorbs road buzz before it reaches your phone, instead of transmitting every bump straight from the handlebar to your device. On long rides, that's the difference between a phone that's just held in place and one that's actually protected.

It fits phones from 4.0 to 7.0 inches and installs the same way as the standard BM4 — compatible with most handlebars and scooters, no special tools or permanent modification needed.

For riders who use their phone hard. If you're running navigation for hours at a stretch, or your bike has a buzzier engine at speed, the vibration controller is the upgrade that protects the phone doing all that work — not just holds it.

Backed by a 1-year replacement warranty.

Key details

• Brand: BOBO
• Model: BM4 PRO — Jaw-Grip with Vibration Controller
• Fits phones: 4.0" to 7.0" screen size
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Added feature: built-in vibration controller to dampen road buzz reaching the phone
• Mounting: compatible with most handlebars and scooters
• Ports & buttons remain fully accessible while mounted
• Warranty: 1-year replacement warranty

If you've already looked at a standard vibration mount and want the version built for riders who take it further — longer highway stretches, bigger phones, engines that buzz harder at speed — this is that version. The BM4 PRO PLUS takes BOBO's vibration-damping mount and steps it up with the PRO PLUS damper, their enhanced tier built for exactly that kind of demanding, everyday riding.

The foundation is the same trusted jaw-grip: spring-loaded arms holding your phone securely from the sides, adjustable via the side knob, with every button and port left fully accessible. What changes is the damper doing the protective work underneath — engineered to give your phone a steadier, more stable ride even when the road and the engine aren't cooperating.

It fits phones from 4.0 to 7.0 inches and mounts to most handlebars and scooters without modification. Every mounting accessory you need is included in the box.

Choose this over the standard BM4 PRO if you ride longer distances, run a heavier or larger phone, or simply want the strongest vibration protection BOBO offers in this mount family — without stepping up to a completely different mounting system.

Comes with all mounting accessories and a 1-year replacement warranty.

Key details

• Brand: BOBO
• Model: BM4 PRO PLUS — Jaw-Grip with PRO PLUS Vibration Damper
• Fits phones: 4.0" to 7.0" screen size
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Added feature: PRO PLUS vibration damper — BOBO's enhanced damping tier for stronger protection against road shocks
• Mounting: compatible with most handlebars and scooters
• Ports & buttons remain fully accessible while mounted
• Includes: mount and all mounting accessories
• Warranty: 1-year replacement warranty

Your phone is your GPS, your music, your calls — and on most bikes, it's got nowhere reliable to sit. The BOBO BM4M solves that with a mount that clamps to your mirror stem instead of the handlebar, keeping your cockpit clean and your phone exactly where you can glance at it.

The jaw-grip does the actual holding: two spring-loaded arms grip your phone from the sides and tighten with a simple side knob, rather than trapping it behind foam pads or stretchy silicone bands that loosen over time. Crank the knob until it's snug, and it stays snug — even on the kind of broken road that shakes cheaper mounts loose. Because the grip holds from the sides only, your screen, buttons, and charging port stay completely accessible while you ride.

It's built for real-world phone sizes — anything from 4.0 to 7.0 inches fits, which covers the vast majority of phones on the market, including most large-screen models. And because this is the long rearview mirror mount version, it's ready to install on scooters and bikes where mirror-mounting makes more sense than clamping the handlebar — no drilling, no permanent modification.

In the box: the phone mount, mirror mount arm, and every tool needed to fit it yourself in a few minutes — no mechanic required.

Key details

• Brand: BOBO
• Model: BM4M — Jaw-Grip with Mirror Mount
• Fits phones: 4.0" to 7.0" screen size
• Mounting: rearview mirror stem (long mount arm)
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Ports & buttons remain fully accessible while mounted
• Includes: mount, mirror mount arm, installation tools
• Warranty: 6 months replacement warranty (manufacturing defects)

Wired chargers mean one more cable to route, one more connector to wear out, one more thing to plug in every single ride. The BOBO BM6 skips all of that — set your phone in the mount, and it starts charging wirelessly, no cable involved.

Inside is a genuine 15W fast wireless charger, quick enough to keep a phone topped up through a full day of navigation rather than just slowing the drain. The mount itself uses BOBO's jaw-grip system, holding your phone from the sides so the screen, buttons, and ports stay fully usable — and underneath, a shock-absorbing damper ball keeps both your phone and the charging connection steady over rough roads. A full 360-degree rotation means you can angle it exactly how you want, whether that's landscape for maps or portrait for a call.

It fits phones from 4.0 to 7.0 inches, and it's genuinely simple to install — no wiring required, since the charger draws power the same way the mount attaches.

Worth knowing before you buy: wireless charging works best with your phone case off, or with a thin case — thick cases and certain magnetic cases can slow or block the charging connection. This applies to any wireless charging mount, not just this one, but it's worth setting expectations with customers upfront.

Backed by a 1-year replacement warranty for manufacturing defects (normal wear and tear excluded).

Key details

• Brand: BOBO
• Model: BM6 — Jaw-Grip with Fast 15W Wireless Charger
• Charging: 15W wireless, no cable connection needed
• Grip mechanism: spring-loaded jaw-grip, adjustable via side knob
• Stability: shock-absorbing damper ball
• Rotation: 360 degrees for flexible viewing angle
• Fits phones: 4.0" to 7.0" screen size
• Ports & buttons remain fully accessible while mounted
• Best charging performance with no case or a thin case
• Warranty: 1-year replacement warranty (manufacturing defects; excludes wear and tear)

Every gearshift scrapes a little more rubber and leather off your left shoe — scuffs that build up ride after ride until your favourite pair looks worn out well before its time. The BSDDP Gear Sleeve slips over your shoe and takes that wear instead.

Made from durable rubber, it sits over the toe and forefoot area — exactly where the shifter makes contact — and shields the shoe from scuffs, scratches, and stains from repeated gear changes. The fit is universal, so it slips onto most shoes and boots without needing an exact size match, and it straps on and off in seconds with no tools required.

Whether you're commuting daily, touring, or just don't want to keep replacing shoes because of shifter wear, this is a low-cost way to make your footwear last.

What it does:

• Shields shoes and boots from scuffs and scratches caused by gear shifting
• Durable rubber construction built to handle repeated shifter contact
• Universal fit — works with most shoes and boots
• Quick to put on and take off, no tools needed

Key Details

Description

Chain Cleaner Spray is an effective fast-acting product for the cleaning of all types of chains & other accessories.

Advantages

• Very effective cleaner and does not leave any residues
• Extremely pure cleaning liquid for all kinds of metals and glasses with no corroding effect
• Economical and Time-Saving
• The Aerosol Jet action helps the cleaning process

Application 

Chain Cleaner Spray is used for the cleaning of dusty and clogged chains. This loosens the spent oil/dirt from the chain to provide smoother running and prolonged chain life.

Features

Moto Torque’s Premium Crash Guard is designed to provide outstanding protection, durability, and premium styling for your motorcycle. Engineered for riders who prioritize safety, performance, and adventure-ready reliability, this crash guard enhances rider confidence while maintaining a sleek touring-inspired appearance. Manufactured using high-quality materials and precision engineering, it delivers dependable impact protection for both on-road and off-road riding, allowing you to ride with greater confidence and peace of mind.

• Enhanced Durability: Built using 25mm mild steel tubes with 1.6mm and 2mm wall thickness options for superior strength and impact resistance.
• Cold Rolled (CR) Tubes: Offers exceptional structural rigidity, long-lasting durability, and reliable performance across diverse riding conditions.
• Advanced X-Protect Nylon Sliders: Designed to absorb and distribute impact forces during falls or collisions, helping reduce potential damage to the motorcycle frame.
• Optimized Mounting Structure: Strategically engineered mounting points evenly distribute impact forces to protect the chassis while maintaining balance and stability.
• Premium Stainless Steel Hardware: Equipped with 304-grade stainless steel nuts and bolts for enhanced corrosion resistance and long-term durability.
• Lifetime Hardware Support: Nuts and bolts are backed by a lifetime warranty for dependable long-term usage and reliability.
• Touring-Focused Styling: Complements the motorcycle’s adventure touring character with a sleek, rugged, and premium appearance.

Warranty Information:

Lifetime warranty on nuts and bolts

6-month warranty on powder coating

NOTE: *This crash guard is equipped with the latest X-Protect series sliders

Features

• Extended Protection Coverage – Designed to safeguard critical components of the motorcycle for enhanced safety and durability.
• Three-Point Mounting System – Provides improved stability, strength, and reliable impact resistance during accidental falls.
• Dual Sliders for Impact Absorption – Helps minimize damage by absorbing shock during crashes or collisions.
• Precision Fit for XPulse 210 – Engineered specifically for seamless integration and secure installation.
• Heavy-Duty & Durable Construction – Built to withstand demanding riding conditions and long-distance adventure touring.
• Ergonomic Rider-Friendly Design – Allows smooth knee movement without interference, ensuring maximum rider comfort.
• Premium Fasteners with Lifetime Warranty – Includes 304-grade stainless steel nuts and bolts for exceptional durability and corrosion resistance.

Ride with confidence using the Moto Torque Max Pro Crash Guard, designed to deliver superior protection and reliability in every riding condition.

Warranty Information:

• Lifetime warranty on nuts and bolts.
• 6-month warranty on powder coating.
  
  

Upgrade your Hero Impulse and Hero Xpulse with the sleek and stylish ENDURO Tail Light. Specifically designed to enhance the sporty aesthetics of your bike, this tail tidy is the perfect blend of form and function.

Key Features:

• Compatibility: Engineered to be a perfect fit for Hero Impulse and Hero Xpulse, ensuring seamless integration with your bike's design.
• Colour: Available in an elegant black finish that complements any bike color.
• Durability: Crafted from high-quality materials, this tail light promises long-lasting durability and performance, standing up to the rigors of the road.
• Design: Boasting a stylish and sporty look, it adds a cool, modern touch to your motorcycle.
• Quality: This is a high-quality imported product, known for its reliable performance and longevity.
• Easy Installation: Designed for hassle-free installation, so you can get back on the road quickly.

Description

The Fleettrack Pro Wired GPS Tracker is an advanced real-time vehicle tracking solution designed to deliver reliable security, live location monitoring, and smart vehicle management. Engineered for seamless installation and continuous performance, this compact wired GPS tracker helps users monitor their vehicles with precision through an intuitive mobile application. Ideal for bikes, cars, and commercial vehicles, Fleettrack Pro ensures enhanced safety, route tracking, and peace of mind wherever you go.

Features: 

Tracking & Connectivity 

• Real-time GPS tracking with accurate live location updates.
• Wired installation ensures stable connectivity and uninterrupted performance.
• Smart mobile application support for instant vehicle monitoring and tracking history.
• Geofencing alerts notify users when the vehicle enters or exits selected zones.
• Live route playback and trip history for better travel monitoring and management.

Security 

• Instant movement and ignition alerts for improved vehicle security.
• Helps protect vehicles against unauthorized usage and theft.
• 24/7 monitoring support for enhanced rider and vehicle safety.
• Safe parking assistance through smart location tracking features.

Design & Compatibility 

• Compact and lightweight design for easy hidden installation.
• Compatible with motorcycles, scooters, cars, and commercial vehicles.
• Durable construction designed for long-lasting everyday usage.
• Includes 12 months SIM data support for uninterrupted connectivity.

Package Contents 

• Fleettrack Pro Wired GPS Tracker Device
• Wiring Kit
• User Support & Mobile App Access
• 12 Months SIM Data Included

Features

The Legundary Fort Knox Series Top Case 45L Aluminium, available at Legundary Customs, is the perfect storage solution for riders who need extra space without sacrificing style. Crafted from high-quality aluminum, this top case boasts robust durability and a sleek black finish that complements any motorcycle. With a generous 45-liter capacity, it provides ample room for storing helmets, jackets, and other essentials, making it ideal for long trips or daily commutes. The case features a secure locking mechanism to keep your belongings safe and is designed for easy installation and removal. Its weather-resistant construction ensures that your items stay protected from the elements, making it a reliable and stylish addition to any motorcycle.

• Remains stable: After you have installed the box with the fittings present in the package, the sturdy parts ensure the box stays in the position for a long time.
  
  
• Doesn't weigh down: With a compact design and the use of high-grade Alloy in manufacture, the top box is the perfect addition to your motorcycle, one that doesn’t add too much weight.
  
  
• Suitable for: All Motorcycles

Firmness is personal — what feels right for a 20-minute commute is nothing like what you want three hours into a highway stretch. The GRAND PITSTOP Air Seat Cushion is one of the few seat cushions that actually lets you change that on the go, instead of locking you into one level of support.

Two inflatable air bladders, built from durable neoprene rubber rather than the thinner PVC used in cheaper alternatives, sit under a breathable mesh cover. A built-in air pump with a simple valve lets you inflate or deflate right on the bike — no stopping, no mouth-inflating, no separate pump to carry. Firmer for support on rough roads, softer for a plusher feel on the highway, adjusted in seconds whenever you want.

The air pocket design spreads your weight across the cushion instead of concentrating it under the tailbone and sit bones, which is where most of the soreness on long rides comes from. The breathable mesh keeps air moving underneath you so heat and moisture don't build up the way they do on a stock seat, and the anti-slip Lycra base keeps the whole cushion locked in place instead of sliding as you ride. It straps on using two under-seat straps — no permanent modification, and just as easy to remove.

Built for cruisers, tourers, adventure bikes, and most motorcycles with a full seat.

What it does:

• Dual air bladders let you adjust firmness on the go via built-in pump — no stopping required
• Neoprene rubber bladders (not PVC) for durability
• Breathable mesh cover reduces heat and moisture buildup
• Spreads rider weight to reduce tailbone, hip, and pressure-point soreness on long rides
• Anti-slip Lycra base keeps the cushion in place
• Straps on with two under-seat straps — no permanent modification

Key details

• Brand: GRAND PITSTOP
• Variant: Sports Premium with Pump
• Fill Material: Neoprene rubber air bladders (dual)
• Cover: Breathable mesh (TPU + Lycra)
• Base: Anti-slip Lycra, non-skid
• Adjustability: Inflate/deflate on the go via built-in pump and valve
• Installation: Two under-seat straps, no modification needed
• Compatibility: Cruisers, touring bikes, adventure bikes, most full-seat motorcycles
• Care: Machine washable cover

Features

DESIGN & PRODUCT OUTLOOK

Premium-quality rigid material is used in the construction of the crash guard to withstand accidental impacts and unfortunate crashes.

Specially designed to protect the engine case, engine head, and exhaust front bend pipe during unexpected falls or collisions.

TOOLS REQUIRED

Allen Key – 8mm & 6mm

Spanner – 13 No.

WARRANTY

6-month warranty on paint and powder coating.

Lifetime warranty on bolts & nuts.

COMES WITH “DO IT YOURSELF” FITMENT GUIDE.

Xpulse 200 4V Rally Seat

Upgrade your ride with the Xpulse 200 4V Rally Seat, designed for riders who love adventure and off-road performance. Featuring a rally-inspired design, this seat helps provide a more comfortable riding position and a sporty look for your motorcycle.

Key Features

• Rally-style design

• Adventure-ready appearance

• Designed for an improved riding posture

• Ideal for off-road and touring enthusiasts

• Perfect upgrade for your motorcycle

Compatibility: Hero Xpulse 200 2V/4V, Hero Xpulse 200 rally 2V/4V

Upgrade your Xpulse and get ready for your next adventure!

Features

The Legundary Hero Xpulse 210 Xplorer Crash Guard for the Hero Xpulse 210, available at Legundary Custom Built, is specially designed to provide superior protection for your motorcycle during off-road adventures and everyday rides. Constructed using high-quality mild steel, this crash guard is engineered to absorb and distribute impact forces effectively, helping protect vital components such as the engine, radiator, and fuel tank during accidental falls or collisions. The precision-engineered structure ensures a perfect fit for the Hero Xpulse 210, allowing easy installation without requiring modifications. Its premium powder-coated finish available in black, red, or white not only enhances the rugged styling of your motorcycle but also provides excellent resistance against corrosion, scratches, and wear.

HOGO racing muffler with a polished chrome-finish body and a gold end cap. A clean, race-style look for riders who want their bike to stand out.

Key details

• Brand: HOGO
• Type: Racing muffler / silencer
• Finish: Polished chrome body, gold end cap
• Mounting: Spring-hook inlet
• Fitment: Send us your bike model and year using the “Ask about this product” box on this page, and we’ll confirm fitment before you order.
• Use: Intended for racing / off-road use.

Description

Constructed using heavy-duty 25.4 mm mild steel tubes with an industry-leading 2 mm wall thickness for superior strength, durability, and impact protection.
Cold Rolled (CR) tubes are utilized to deliver exceptional structural strength and long-lasting performance during impacts and abrasions.
All nuts and bolts are manufactured from premium Stainless Steel 304 grade to ensure excellent corrosion resistance and durability.
MIG welding technology is applied to connect critical sections, providing maximum structural integrity and long-term reliability.
Grit blasting treatment is performed before the powder coating process to achieve a smooth, uniform, and highly durable finish.
Advanced CNC bending machines are used for precise tube shaping and accurate crash guard formation.
DESIGN & PRODUCT OUTLOOK

Manufactured using premium rigid materials, this crash guard is designed to withstand accidental impacts, falls, and crashes.
Equipped with dual sliders on both sides to help protect the fuel tank, handlebar, and front body panels during accidental drops or collisions.
TOOLS REQUIRED

Allen Key – 5 mm, 6 mm, and 8 mm
Spanner – 10 & 17 (2 spanners)

An hour into any ride, the stock seat starts winning the argument — numb hips, a sore tailbone, and a seat that traps heat instead of letting it go. This gel cushion sits over your existing seat and fixes both problems at once.

Inside, a 3D honeycomb structure keeps air moving underneath you instead of trapping heat and sweat against the seat — the raised cells and central groove let air circulate continuously, so you stay noticeably cooler and drier even deep into a long ride. Underneath that, a high-elasticity gel fill absorbs the vibration and bumps that add up to hip and tailbone soreness on rough roads, spreading your weight evenly instead of concentrating it on a few pressure points.

Fitting is simple: it straps over your existing seat with an adjustable belt and quick-release buckle, no modification or tools needed, and folds flat for storage when you're not using it. The underside grips the seat to stay in place as you ride.

What it does:

• 3D honeycomb structure for continuous airflow — stays cooler and drier on long rides
• High-elasticity gel fill absorbs shock and evenly distributes weight
• Relieves hip and tailbone pressure on long-distance rides
• Adjustable strap with quick-release buckle — fits over most existing seats
• Foldable for easy storage and transport

Key details

• Size: Small
• Structure: 3D honeycomb, breathable
• Fill: High-elasticity gel
• Fit: Universal — straps over existing motorcycle seat
• Installation: Adjustable strap, quick-release buckle, no tools required
• Foldable: Yes

Warranty Information:

Lifetime warranty on nuts and bolts.

6-month warranty on powder coating finish.

Important Note: This crash guard is compatible with 2019 and above models.

Features

A small and compact yet very powerful fog light can light up the harshest of viewing conditions. With powerful LEDs, it gives you maximum visibility and will help other vehicles on the road to notice you. To mount a fog light on your motorcycle, you need a fog light clamp set additionally. We are presenting, a clamp set designed to suit Royal Enfield Interceptor & Continental GT.This Fog Light Clamp Is made from super strong & non-toxic material that can stand up to years of repeated use without ever cracking or breaking.